AIGNEP ATEX-certified solenoid valves — 04C-series explosion-proof valves; ATEX coil kit (Series 108-030-0952)
Coverage Confirmed unit-certified coverage is the 04C-series 2/2 NC valves across 1/8"–1" NPTF, plus the standalone ATEX coil kit usable on compatible AIGNEP valve bodies. [VERIFY] A fully unit-certified pneumatic spool 5/2 directional control valve — the configuration this product type describes — is not confirmed on an AIGNEP engineering datasheet; public ATEX documentation covers 2/2 process valves and the coil kit. Confirm with AIGNEP whether a unit-certified 5/2 DCV exists, or whether the offering is a standard 01V valve fitted with the ATEX coil kit (which would change how the certification scope is described).
AIGNEP offers ATEX / HAZLOC explosion-proof solenoid valves certified for hazardous-area service. The publicly documented unit-certified line is the 04C series of 2/2 normally-closed valves (1/8" through 1" NPTF), certified for Class 1 Division 1 / ATEX hazardous locations. AIGNEP also supplies a separately ATEX-certified coil kit (Series 108-030-0952) approved for Zone 0/1/2. AIGNEP states an ATEX II 2G/D Ex h certification across parts of its valve range, with Class H coils.
Why AIGNEP here AIGNEP carries ATEX / hazardous-location certified pneumatic valve products and an ATEX coil program, and pairs with AIGNEP's hazardous-rated FRLs and cylinders toward a single-brand certified pneumatic train — coverage most distributors cannot quote. AIGNEP is direct-sourced for SPC.
Cylinder spare parts / seal sets for AIGNEP ISO and compact cylinder lines [VERIFY series designation]
Coverage Spare-part coverage tracks AIGNEP's ISO-standard and compact cylinder families, bore-specific. [VERIFY] AIGNEP does not publish a named cylinder rebuild kit series; the existence of cylinder spare parts is confirmed via AIGNEP's B2B catalog, but kit naming and per-series/bore coverage need manufacturer-datasheet confirmation. Confirm with Andrew whether AIGNEP supplies discrete cylinder rebuild kits.
AIGNEP offers spare parts for its pneumatic cylinder range, so an installed AIGNEP cylinder can be resealed rather than replaced. AIGNEP's cylinder lines follow ISO mounting standards, and rebuild parts are matched to the AIGNEP cylinder series and bore.
Why AIGNEP here When the installed cylinder is AIGNEP, AIGNEP's own spare parts are the matching rebuild — they fit the AIGNEP cylinder geometry and keep a value-tier pneumatic system on one consistent brand for both equipment and service.
FRL Evo series filter-regulator module
Coverage FRL Evo includes a filter-regulator module plus a coalescer-filter option for finer filtration; padlockable regulator versions lock the setting. NSF and ATEX options exist in AIGNEP's broader air-prep offer per SPC research; Evo certified codes are not confirmed on the datasheet. [VERIFY]
AIGNEP's filter-regulator is the filter-regulator module of the FRL Evo series — modular, in two compact size ranges (1/4"–3/8" and 3/8"–1/2"), rated to 18 bar (about 261 PSI), with a quick-release bowl and integrated manometer in silicon-free polymeric construction.
Why AIGNEP here AIGNEP delivers a full modular filter-regulator at value pricing and is the lineup's route to NSF food-grade and ATEX-capable air prep — the pick when certification or a broader Italian system matters more than a premium brand name.
FRL Evo series (modular)
Coverage FRL Evo covers filter, coalescer filter, filter-regulator, padlockable regulator, lubricator, shut-off valve, and progressive-start modules, so F+R+L and F+R builds come from one family in two body size ranges. NSF food-grade and ATEX hazardous-location options are part of AIGNEP's broader air-prep offer per SPC research; the specific Evo certified variants and model codes are not confirmed on the manufacturer datasheet. [VERIFY]
AIGNEP's air-prep line is the FRL Evo series — a modular system in two compact size ranges (1/4"–3/8" and 3/8"–1/2"), rated to 18 bar (about 261 PSI) maximum. Components clamp together with a fast modular connection and a quick-release bowl, and an integrated manometer reads pressure at the unit; construction is silicon-free techno-polymeric with metal threads. A combination build assembles from the same Evo filter, regulator, and lubricator modules.
Why AIGNEP here AIGNEP gives SPC a complete modular air-prep family at a value price point and — uniquely in this lineup — a path to NSF food-grade and ATEX hazardous-location air preparation, making it the choice when a job needs certified air prep without premium-brand cost.
Service items for AIGNEP FRL Evo modular air-preparation units [VERIFY series designation]
Coverage Service-item coverage tracks AIGNEP's modular FRL Evo range — standalone filters, filter-regulators, regulators, lubricators, and combination units — including the ATEX-rated FRL variants where AIGNEP's hazardous-location certification carries through. [VERIFY] AIGNEP does not publish a named FRL service kit series; replacement-element availability is confirmed for the modular FRL line, but the per-series filter-element grades and gasket-set part numbers need manufacturer-datasheet confirmation.
AIGNEP offers replacement elements and service parts for its modular FRL Evo air-preparation line, so an installed AIGNEP filter, regulator, lubricator, or combination unit can be serviced in place. Service items are matched to the AIGNEP FRL series and the element being serviced.
Why AIGNEP here When the installed FRL is AIGNEP, AIGNEP's own service items are the matching consumable — they fit the AIGNEP modular body and keep a value-tier air-preparation install on one brand. AIGNEP is also the service route for ATEX-rated FRLs in hazardous locations.
80220AC-series industrial-profile quick couplers (sockets)
Coverage 80220AC series covers the 1/4" industrial profile in steel. [VERIFY] Availability of high-flow, larger port sizes, and alternative body materials (composite, stainless) in the AIGNEP industrial-coupler line is not confirmed against a published datasheet. AIGNEP's separate 80620 series covers safety-vented couplers.
AIGNEP's USA industrial-profile coupler is the 80220AC series in steel, 1/4" industrial (Type A) profile — 80222AC female socket, with a matching 80221AC male coupler and 80225AC barbed socket. AIGNEP, an Italian pneumatics manufacturer, supplies this as a conventional (non-vented) industrial coupler. [VERIFY] AIGNEP 80220AC flow ratings (SCFM), working-pressure rating, and full body-material/profile range are not published on a manufacturer engineering datasheet — the b2b.aignep.com USA page lists model numbers only.
Why AIGNEP here AIGNEP gives SPC a directly sourced conventional industrial coupler for customers with a hard, price-only budget who want a standard-profile coupler without the safety-vent feature — a straightforward commodity option from a manufacturer SPC already carries across its pneumatics line.
X Series ISO 15552 profile cylinders (XH double-acting magnetic)
Coverage The X Series covers the standard ISO 15552 function across the 32-125mm bore range. AIGNEP additionally offers ATEX-certified cylinders for hazardous-location service and NSF-oriented stainless builds for food-contact / washdown environments — AIGNEP is the portfolio's source for ATEX-rated and NSF cylinder options. [VERIFY] Exact ATEX and NSF cylinder series designations and certification ratings not confirmed against a public AIGNEP engineering datasheet.
AIGNEP's ISO 15552 cylinder is the X Series — Italian-engineered profile cylinders built to the ISO 15552 standard in bores 32, 40, 50, 63, 80, 100, and 125mm, double-acting with a magnetic piston (XH designation). Because they follow the ISO 15552 dimensional and accessory standard, they share mounting hardware and envelope with other ISO 15552 cylinders.
Why AIGNEP here AIGNEP is the value-tier ISO 15552 cylinder for general industrial automation and maintenance replacement on machines without a brand spec lock, and it is the portfolio's route to ATEX and NSF-certified cylinders for hazardous-location and food-contact applications.
FRL Evo series lubricator module
Coverage FRL Evo lubricator module with automatic or semi-automatic vacuum loading; quick-release bowl. Standard-fog versus micro-fog delivery is not distinguished on the manufacturer datasheet. [VERIFY]
AIGNEP's standalone lubricator is the lubricator module of the FRL Evo series, with automatic or semi-automatic vacuum oil loading so the bowl can be refilled without depressurizing the line. Modular, two compact size ranges, rated to 18 bar (about 261 PSI), with a quick-release bowl.
Why AIGNEP here AIGNEP's vacuum-loading lubricator allows refill without taking the line down and integrates into a complete value-tier modular air-prep family — the pick when system fit and serviceability lead.
01V series valves on 01VB manifold bases
Coverage 01VB bases carry 5/2 single, 5/2 double, and 5/3 01V stations. NPTF and G (BSPP) porting. Fixed-length manifold bases by station count. [VERIFY] Whether AIGNEP offers a field-expandable modular stacking base and an ISO 5599/15407 standardized-interface manifold in the 01V line — public listings show fixed-length 01VB bases; modular/ISO scope to be confirmed on a current AIGNEP manifold datasheet.
AIGNEP's 01V valve range mounts onto the 01VB manifold base family — fixed-length manifold bases in NPTF and G threads, available in multiple station counts (e.g. 3- and 4-station fixed-length bases). The 01V platform is modular: solenoid, pneumatic-pilot, mechanical, and manual valves all build onto the same base system.
Why AIGNEP here AIGNEP's 01VB manifold uses the same modular 01V platform as its inline valves, so a manifold-mounted machine and a single-valve drop draw from one valve family — convenient where a customer standardizes on AIGNEP across a plant. AIGNEP is direct-sourced for SPC.
50000 Red / Black metallic push-in series; 57000 heavy-duty nickel-plated brass series
Coverage Nickel-plated brass bodies; metric and inch tube ranges; 50000 Red/Black metallic variants for general higher-pressure service and the 57000 heavy-duty line where strength is the priority; BSPP, BSPT, and Metric threads. Composite-construction metal-bodied fittings (metal body, polymer sleeve).
AIGNEP's metallic push-in fittings span the nickel-plated-brass variants of the 50000 Red and Black series and the 57000 heavy-duty line, a brass-nickel-plated range engineered for strength and higher-pressure performance. They carry AIGNEP's broad European thread coverage (BSPP, BSPT, Metric) and integrate with the wider AIGNEP pneumatic system.
Why AIGNEP here AIGNEP adds broader European thread coverage and a heavy-duty option to SPC's metallic-fitting bench, and keeps the fitting consistent with an AIGNEP-built machine for a customer standardizing on the Italian system.
Infinity Air Pipeline System
Coverage Covers the full modular aluminum diameter range from drop-leg sizes (20-32 mm) through plant header sizes (63-168 mm and above), plus a dedicated 14 mm small-bore series. Push-in connection across the line; tube-to-tube, tube-to-thread, and fitting-to-fitting configurations. Aluminum pipe with brass push-in fittings. [VERIFY] per-diameter maximum working pressure ratings — Aignep publishes a 5x safety factor and ANSI B31.1 conformance but per-size PSI tables were not extractable from the public catalog.
Italian-engineered modular aluminum pipeline introduced in 2000 as an all-metal replacement for threaded iron. Pipe runs span a wide diameter ladder — 20, 25, 32, 40, 50, 63, 80, 110, 168 mm and larger — with a brass-bodied push-in fitting line using technopolymer release collars. Fittings are tested in accordance with ANSI B31.1 Power Piping and carry a published 5x safety factor over rated working conditions. Operating range -20°C to 80°C.
Why AIGNEP here AIGNEP brings a deep, fully modular diameter ladder under one system, so a single brand can serve both small drop legs and large plant headers without mixing manufacturers. The push-in connection installs fast and reconfigures without tools, and the ANSI B31.1 test basis with a 5x safety factor gives a clear engineering pedigree. Strong where a plant wants one coherent piping system that scales across the whole site.
59000 FOOD series push-in fittings
Coverage Low-lead brass body, food-grade FKM seals; metric and inch tube ranges; certified for food contact (NSF/ANSI 169) and additionally for potable water and beverages (NSF/ANSI 61/372). For true wet/washdown and dairy contact zones AIGNEP's 60000 full-stainless line is the step-up; the 54000 SpringFit line is a separate drinking-water-focused option.
AIGNEP's food-grade line is the 59000 FOOD series — push-in fittings built for direct and indirect contact with food, beverages, and drinking water. Construction is a low-lead brass alloy body with a food-grade FKM O-ring and a stainless-steel clamp; threads are supplied with an integral sealing gasket for immediate use. The series carries NSF/ANSI 169, NSF/ANSI 61, and NSF/ANSI 372 certification and complies with EU 1935/2004 and drinking-water regulations.
Why AIGNEP here AIGNEP 59000 lets a food or beverage plant put a fully food-contact-certified fitting on its pneumatic connections — and pass an audit — without the cost of full stainless where the zone does not require it; it is the right-sized tier between standard composite and 316L stainless.
80220AC-series industrial-profile plugs; 80621 safety-coupler male plug
Coverage 80221AC covers the male plug in 1/4" industrial profile, steel. [VERIFY] Larger port sizes, hose-barb plug options, alternative body materials, and additional profiles in the AIGNEP plug line are not confirmed against a published datasheet.
AIGNEP's USA plug offering is the 80221AC male coupler in the 1/4" industrial (Type A) profile, in steel — the mating male half of the 80220AC industrial socket series. AIGNEP also lists the 80621 male safety coupler in its 80620 series. [VERIFY] AIGNEP plug end-connection options (male/female NPT, barb), body materials beyond steel, and the full profile range are not published on a manufacturer engineering datasheet — the USA b2b page lists model numbers only.
Why AIGNEP here AIGNEP plugs mate with the AIGNEP industrial socket series SPC sources directly, giving customers a complete matched conventional coupler set when a standard-profile, price-led plug is what the job calls for.
80620-series safety couplers (sockets)
Coverage 80620 covers the 1/4" Industrial (Type A) profile safety-vented socket in nickel-plated brass; the 80622 is the NPTF female socket. AIGNEP also lists European-profile safety couplers and plugs. [VERIFY] availability of high-flow, additional port sizes, stainless-steel body, and which profiles SPC stocks within the 80620 range is not confirmed against a published datasheet. Plugs ordered separately.
AIGNEP's safety-vented coupler is the 80620 series — a two-stage safe-disconnect socket in the 1/4" Industrial (Type A) profile. The first stage vents trapped downstream pressure to atmosphere; the second releases the plug de-energized, eliminating hose-whip. Coupling body and ring in nickel-plated brass, technopolymer sleeve, NBR 70 seals, stainless-steel shutter spring and balls. Rated to 220 PSI, 0–180°F, for compressed-air service. The 80622 female socket takes NPTF threads; a standard matching-profile plug is used with it. [VERIFY] full size range, any high-flow option, and stainless-body or alternative-profile 80620 variants are not published on a manufacturer engineering datasheet — the b2b.aignep.com USA page lists model numbers only.
Why AIGNEP here AIGNEP gives SPC a directly sourced safety-vented coupler from a manufacturer already carried across its pneumatics line — a single-brand path for customers standardizing fittings, valves, and couplers on AIGNEP. The 80620's two-stage disconnect delivers the same OSHA hose-whip protection as the category default, through an existing AIGNEP supply relationship.
01V series — 01VS solenoid-pilot directional control valves
Coverage 01VS covers 5/2 single solenoid (pilot/spring return), 5/2 double solenoid, and 5/3 closed/open/pressure center across the three body sizes. NPTF and G (BSPP) threads. Coil voltages include 24 VDC and 110 VAC; LED and surge-suppressor connector options. Valves mount inline or onto 01VB manifold bases. [VERIFY] AIGNEP markets a NAMUR-interface and stainless variant within the broader valve range — confirm scope on a current 01V engineering datasheet.
AIGNEP's pneumatic directional control valve family is the 01V series — a modular spool-valve range in three sizes (1/8", 1/4", 1/2"), rated to roughly 10 bar working pressure. The 01VS solenoid configuration uses solenoid-pilot actuation with internal or external pilot. The 01V range shares a common modular platform — solenoid, pneumatic-pilot, mechanical, and manual operators all build on the same valve and manifold system.
Why AIGNEP here AIGNEP is an Italian pneumatics manufacturer with a modular 01V valve platform and a full pneumatic system — fittings, FRLs, valves, and cylinders — from one brand, which suits customers standardizing on a single European supplier. AIGNEP is a direct-sourced line for SPC.
60000 series stainless steel push-in fittings
Coverage AISI 316L stainless body; metric and inch tube ranges; parallel and universal thread solutions; NSF/ANSI 169-certified and EU 1935/2004-compliant for food contact; vacuum to ~290 PSI, -15°C to +200°C. AIGNEP's separate 59000 line is the dedicated brass-bodied food/potable-water fitting; 60000 is the full-stainless option.
AIGNEP's stainless line is the 60000 series — body, collet, sleeve, and grip ring fully in AISI 316L stainless steel, with food-grade FKM seals and a technopolymer safety ring. It is built for corrosive fluids and aggressive environments and is rated well above composite: vacuum to ~290 PSI, +5°F to +392°F (-15°C to +200°C). The line is NSF/ANSI 169 certified and EU 1935/2004 compliant, so it doubles as the wet-zone food-contact fitting.
Why AIGNEP here AIGNEP 60000 is SPC's off-the-shelf full-stainless PTC fitting — 316L throughout, NSF-certified, project-ready without a made-to-order lead time — the deeper bench for pharma, semiconductor, marine, dairy, and high-purity builds that cannot wait on a custom stainless program.
FRL Evo series filter and coalescer-filter modules
Coverage FRL Evo standard filter plus coalescer filter for fine oil-aerosol removal; automatic and semi-automatic vacuum condensate exhaust drains. Exact element micron grades are not stated on the manufacturer datasheet. [VERIFY]
AIGNEP's standalone filter is the filter module of the FRL Evo series, offered as a standard filter and a coalescer filter for finer oil-aerosol removal. Modular, two compact size ranges (1/4"–3/8" and 3/8"–1/2"), rated to 18 bar (about 261 PSI), with a quick-release bowl and automatic or semi-automatic vacuum condensate exhaust.
Why AIGNEP here AIGNEP provides standard and coalescing filtration in one modular value-tier family, and is the lineup's route to NSF food-grade and ATEX-capable air prep when certification matters.
FRL Evo series regulator modules (padlockable and frontal-adjust)
Coverage FRL Evo padlockable regulator and frontal-adjust padlockable regulator — both lock the pressure setting against tampering; integrated manometer. Precision and pilot-operated variants are not detailed on the manufacturer datasheet. [VERIFY]
AIGNEP's standalone regulator is the regulator module of the FRL Evo series, offered as a padlockable regulator and a padlockable frontal-adjust regulator. Modular, two compact size ranges, rated to 18 bar (about 261 PSI), with an integrated manometer and quick modular clamping.
Why AIGNEP here AIGNEP delivers a tamper-lockable modular regulator at value pricing and integrates into a complete Italian-engineered air-prep and pneumatics system — the pick when broader-system fit and price lead the decision.
50000 series push-in fittings
Coverage Technopolymer body; 50000N metric and inch sub-ranges; 50000 Black and Red sub-series; ATEX-certified variant (EU Directive 2014/34/UE) selected by the plant's hazardous-area classification; working pressure to ~218 PSI (~15 bar), -20°C to +80°C. No food-grade or stainless variant in the 50000 line — those are AIGNEP's 59000 and 60000 lines.
AIGNEP's technopolymer push-in line is the 50000 series — quick-connect, full-flow, vacuum-resistant, available in BSPP, BSPT (universal short), and Metric threads. The 50000 series is the connection layer of AIGNEP's coordinated Italian pneumatic system, so a machine can be built end-to-end on one brand standard, and it carries an ATEX-certified configuration for classified areas.
Why AIGNEP here AIGNEP is the brand that makes this type what it is — the full Italian pneumatic system that lets a customer build a machine from one brand, plus the only ATEX-certified push-in fitting in the portfolio for hazardous locations.
AIGNEP valve spare parts / service items [VERIFY series designation]
Coverage Spare-part coverage tracks AIGNEP's valve range, including ATEX hazardous-location valve variants where AIGNEP's certification carries through. AIGNEP does not publish a named valve seal-kit series — confirmed with Andrew at the Phase 5 decision session (2026-05-22): AIGNEP supplies valve repair as individual loose spare parts, not as discrete kits. [VERIFY] the exact AIGNEP spare-part series designation and per-series coverage against AIGNEP documentation.
AIGNEP supports its solenoid-valve line with spare parts and accessories for the solenoid pilots and valve internals. AIGNEP's value-tier Italian valves are matched to AIGNEP-specific spare parts so an installed AIGNEP valve is serviced rather than replaced.
Why AIGNEP here When the installed valve is AIGNEP, AIGNEP's own spare parts are the matching repair — they fit the AIGNEP valve geometry and keep the machine on a single, consistent pneumatic brand. AIGNEP is the route for servicing ATEX-rated valves in hazardous locations.
