KELTEC replacement air/oil separator elements — KV-series and KD-series model-number lines (2,586 distinct part numbers)
Coverage Covers the air/oil separator element variants taught on the Product Type page: pleated, conventional deep-filter, and spin-on housings, across the rotary screw HP range. Elements run on the KELTEC KV-series and KD-series model-number lines, dimensionally ranging roughly 4.4-29 in outside diameter and 2.6-48 in height. Cross-referenced to OEM part numbers across 328 distinct OEM brands including Atlas Copco, Ingersoll Rand, Sullair, Gardner Denver, Quincy, Kaeser, FS-Curtis, ABAC and ELGi. Static-grounded element option for separator-tank ESD protection. The replacement element is matched to the OEM part by cross-reference and dimensions rather than by an independent KELTEC engineering spec.
KELTEC Technolab (Twinsburg, OH) builds aftermarket air/oil separator elements cross-referenced to OEM part numbers. Construction is multiple grades of borosilicate glass-fiber coalescing media wrapped onto a support tube, offered in pleated, conventional deep-filter, and spin-on styles to match the OEM separator's mounting. KELTEC publishes its OEM cross-reference openly and is ISO 9001 certified, and guarantees its elements meet or exceed OEM specification. Static-grounded construction is offered to prevent electrostatic discharge inside the separator tank. KELTEC's March 2025 Domestic Pricebook lists 8,660 separator line items — 2,586 distinct KELTEC element part numbers spanning 328 distinct OEM compressor brands, on the KV-series (675 distinct part numbers) and KD-series (259 distinct part numbers). As an aftermarket OEM-replacement brand, KELTEC does not publish an independent per-part pressure-drop / service-life datasheet — the OEM cross-reference plus the KV dimensional table (outside diameter ~4.4-29 in, height ~2.6-48 in, with flow direction noted) is the published specification, and the element is matched to the OEM separator by cross-reference and physical dimensions.
Why KELTEC here KELTEC is the cross-reference specialist for compressed-air filtration consumables — its catalog crosses 50,000+ OEM part numbers, so the DC channel can quote a separator for virtually any rotary screw compressor already installed at a customer site, regardless of who originally sold it. The air/oil separator is the highest-cost, highest-margin, most frequently replaced service item, and KELTEC's ISO 9001 program plus open cross-reference make it the dependable aftermarket source for it.
CAH-NTR Series compressed air coalescing filters; KWS Series water separators
Coverage CAH-NTR housings: 11 models from CAH-NTR-0040-NPT (40 cfm, 1/2") to CAH-NTR-1600-NPT (1600 cfm, 3"), all rated 290 psi (20 bar). Four element grades: P (prefilter, 5 micron / 5 ppm), X (general purpose, 1 micron / 0.50 ppm), Y (oil removal, 0.01 micron / 0.01 ppm), A (activated carbon, 0.01 micron / 0.001 ppm). KWS water separators: 7 models KWS14 (1/4", 14 scfm) to KWS1294 (3", 1294 scfm), max working pressure 235 psi.
Coalescing filters engineered to ISO 8573 / ISO 8573-1 compressed air quality classifications; removes particles as small as 0.01 micron at pressures up to 290 psi. Fluted stainless-steel tube resists collapse and pressure drops via diagonal airflow; PVC-impregnated foam aids water/oil drainage; low pressure drop for energy efficiency. Upgraded CAH-NTR housings have a true zero-clearance design for tool-free element changes. CAH-CL housing clamps allow serial connection without extra piping; KWMD wall-mount clamps. Three drain options: CAH-ED external drain, SDV solenoid electronic drains (with strainer and ball valve), and SDV-ZERO zero-loss electronic drains. Third-party / independently tested. KELTEC-Technolab KWS water separators use centrifugal action at low pressure drop; automatic drain valves standard; bodies electrostatic powder-coated inside and out. ISO 9001:2015 certified.
Why KELTEC here KELTEC's CAH-NTR coalescing filters are engineered to ISO 8573-1 air-quality classes and remove particles to 0.01 micron at pressures up to 290 PSI — a higher pressure ceiling than a standard 232-PSI inline housing. A fluted stainless-steel core resists collapse, diagonal airflow keeps pressure drop low, and the NTR housings use a true zero-clearance design for tool-free element changes in tight compressor rooms. Three integrated drain options — external, solenoid electronic, and zero-loss electronic — and four element grades from prefilter through activated carbon let SPC build a complete, independently tested filtration stage from one series. This complete-housing CAH line sits alongside KELTEC's aftermarket cross-reference range, so SPC can quote either a new KELTEC housing or a replacement element for a competitor's housing.
KELTEC coalescing elements — KP-family model-number series (KP / KPF / KPFEK / KPWFH / KPFHE / KPE; 4,002 distinct part numbers) & filter housings
Coverage Coverage is by cross-reference breadth rather than a fixed specialty-variant ladder. KELTEC's March 2025 Domestic Pricebook lists 11,636 coalescing line items — 4,002 distinct KELTEC element part numbers spanning 204 distinct OEM compressor/filter brands (Parker, Finite, Great Lakes Air, Beko, Arrow and others). Coalescing elements run on the KP-family model-number series (KP, KPF, KPFEK, KPWFH, KPFHE, KPE and related prefixes). High-flow or higher-pressure needs are met by matching the corresponding OEM element by cross-reference rather than by an independent KELTEC spec. As an aftermarket OEM-replacement brand, KELTEC does not publish an independent coalescing-housing micron/pressure datasheet — the OEM cross-reference is the published specification, and the element is matched to the OEM part by cross-reference and physical dimensions. No hazardous-location (Class 1 Div 1) variant.
KELTEC supplies coalescing filter elements and housings with a cross-reference catalog spanning 50,000+ OEM part numbers — a DC rep can identify the existing housing on a customer's wall (Parker, Finite, Great Lakes Air, Beko, Arrow, and others) and quote a fitting KELTEC replacement element on the spot. KELTEC also offers its own complete coalescing housings. The company has 40+ years in compressed-air and gas filtration; its coalescing media is validated to deliver clean air at low pressure drop, and replacement is at the standard 8-10 PSI differential.
Why KELTEC here KELTEC's strength is aftermarket reach: its 50,000+ part cross-reference lets SPC serve the recurring coalescing-element replacement business on any compressor or filter brand a customer already owns, without having won the original housing sale. That makes KELTEC the entry point for capturing the most predictable revenue stream in a compressed air system — scheduled element replacement — in plants where the original equipment came from someone else.
KELTEC aftermarket compressor intake / air-end inlet filter elements — KA / KC / KS air-filter model-number series
Coverage Covers the intake filter element formats taught on the Product Type page — panel and cylindrical cartridge — across the rotary screw HP range. Elements run on the KELTEC KA / KC / KS air-filter model-number series (panel-filter variants on KA), with dimensional coverage of roughly 1.2-30 in outside diameter and 1-39 in overall height, cross-referenced to OEM part numbers across 248 distinct OEM brands in the KELTEC March 2025 Domestic Pricebook. The replacement intake element is matched to the OEM part by cross-reference and dimensions; KELTEC does not publish an independent intake-element efficiency datasheet. Pairs with the air/oil separator and oil filter in the annual service kit.
KELTEC supplies aftermarket compressor intake filter elements cross-referenced to the OEM part number from the compressor nameplate. Elements are offered in the standard panel and cylindrical cartridge formats used by rotary screw air-ends, under KELTEC's ISO 9001 program. KELTEC's March 2025 Domestic Pricebook crosses 5,222 air-filter line items (intake/inlet elements included) — 1,123 distinct KELTEC element part numbers spanning 248 distinct OEM compressor brands. As an aftermarket OEM-replacement brand, KELTEC matches the intake element to the OEM part by cross-reference and physical dimensions rather than by an independent KELTEC micron/efficiency datasheet — the cross-reference catalog plus the element dimensional table is the published specification.
Why KELTEC here KELTEC's cross-reference catalog lets the DC channel match the correct intake element to any installed compressor from the nameplate alone, and the intake filter is almost always due at the same interval as the separator — so carrying KELTEC for both keeps the full annual service kit on a single cross-reference and a single order.
KELTEC aftermarket compressor oil filter elements — KL-series model-number line (spin-on and cartridge; 353 distinct part numbers)
Coverage Covers the spin-on and cartridge oil filter formats taught on the Product Type page, across the rotary screw HP range. Elements run on the KELTEC KL-series model-number line, cross-referenced to OEM part numbers across 158 distinct OEM compressor brands in the KELTEC March 2025 Domestic Pricebook (2,276 line items, 353 distinct KELTEC part numbers). The replacement filter is matched to the OEM part by cross-reference rather than by an independent KELTEC micron / bypass-valve spec. Completes the three-element annual service kit with the air/oil separator and intake filter.
KELTEC supplies aftermarket compressor oil filter elements — spin-on canister and drop-in cartridge styles — cross-referenced to the OEM part number, guaranteed to meet or exceed OEM specification under KELTEC's ISO 9001 program. KELTEC's March 2025 Domestic Pricebook lists 2,276 oil-filter line items — 353 distinct KELTEC element part numbers spanning 158 distinct OEM compressor brands, predominantly on the KL-series model-number line (1,905 line items). As an aftermarket OEM-replacement brand, KELTEC does not publish an independent micron-rating / bypass-setting datasheet — the OEM cross-reference is the published specification, and the oil filter is matched to the OEM part by cross-reference, so it inherits the original element's micron rating and bypass setting by equivalence.
Why KELTEC here The oil filter is replaced at every oil change and is always a line item in the annual kit; sourcing it from KELTEC keeps all three core consumables on one cross-reference catalog and one order, and KELTEC's ISO 9001 program assures the element matches OEM filtration performance.
KELTEC food-grade compressor lubricants — KOSFG series (ISO 40 / 100 / 200 / 300 / 400; USDA/FDA-compliant) plus KOFLUSHFG food-grade flush
Coverage Food-grade synthetic compressor oil meeting USDA/FDA requirements — the KELTEC KOSFG series, confirmed in the March 2025 Domestic Pricebook in ISO viscosity grades 40 / 100 / 200 / 300 / 400, with a matching KOFLUSHFG food-grade flush for mineral-to-food-grade changeover. Supplied in 5-gal pail and 55-gal drum packs. Coverage is by cross-reference breadth rather than a fixed variant ladder: the food-grade fill is matched to the OEM-specified grade by cross-reference. No hazardous-location sub-variant. NSF H1 registration status is not stated in KELTEC's cross-reference pricebook (published claim is USDA/FDA compliance) and would require direct confirmation from KELTEC.
Within its compressor-lubricant range, KELTEC Technolab offers a food-grade line formulated to meet USDA and FDA requirements for incidental food-contact service. It is the food-safe counterpart to KELTEC's standard PAO/diester synthetic fills, built on the same OEM cross-reference model — cataloged against the factory fill it replaces so a DC rep can quote a food-grade equivalent for the compressor a customer already runs. The KELTEC March 2025 Domestic Pricebook confirms the food-grade line as the KOSFG series, supplied in ISO viscosity grades 40, 100, 200, 300 and 400, each in 5-gal pail (-05) and 55-gal drum (-55) packs, with a matching KOFLUSHFG food-grade changeover flush. KELTEC's published claim for this line is USDA/FDA compliance; whether the KOSFG series additionally carries a current NSF H1 registration is not stated in the pricebook and would need confirmation direct from KELTEC — it is not asserted here.
Why KELTEC here KELTEC brings its aftermarket cross-reference model to the food-grade slot too: a food-safe fill cataloged against the customer's existing compressor brand, so SPC can serve a food, beverage, or pharmaceutical plant's recurring food-grade oil business without having won the original equipment sale. It pairs naturally with the KELTEC filter elements SPC already crosses, giving the DC channel one aftermarket source for the compliant fill and the filtration around it.
KELTEC Muffler Line — Standard Series and Relief Valve Series
Coverage 8 sizes (ADM/AEM series) by end connection: ADM/AEM-25 (1/4", 75 scfm), -38 (3/8", 185 scfm), -50 (1/2", 290 scfm), -75 (3/4", 385 scfm), -1 (1", 625 scfm), -125 (1-1/4", 986 scfm), -150 (1-1/2", 1200 scfm), -2 (2", 2100 scfm) — max flow rated at 85 psi. Available in BSP and NPT threads, male and female. Standard Series and Relief Valve Series.
Mufflers reduce noise levels (up to 80 dB reduction) and disperse a concentrated air stream to lower pressure over a wider surface area. Rated to 220 psi. Hex head for easy fitting; long life and maintenance-free. The Relief Valve Series adds a relief valve to release excess pressure, lowering risk of industrial accidents and avoiding downtime. KELTEC offers a complete line of mufflers and filters, all-metal mufflers and filters, porous metal filter silencers, and breather-vent-filters, kept in stock. ISO 9001:2015 certified.
KOWS Series Oil-Water Separator Units
Coverage 7 models sized by compressor capacity: KOWS-60 (60 cfm), KOWS-250 (250 cfm), KOWS-400 (400 cfm), KOWS-800 (800 cfm), KOWS-1200 (1200 cfm), KOWS-1600 (1600 cfm), KOWS-2000 (2000 cfm). All deliver <10 ppm oil at outlet. KOWS-60 is a single-use unit; KOWS-250 and KOWS-400 include an oil storage box.
Separates oil from compressor condensate per ISO 14000, reducing oil concentration from 3000-500 ppm down to below 10 ppm (legally dischargeable). KOWS-250/400 working principle uses a depressurization chamber, a Mikro-Sep separator element, Mikro-X-Tex material, and Mikro-Carb activated-carbon granules in successive stages. KOWS-60 uses inlet/outlet ports, bulk oil removal shred, special material, and an anti-siphon vent. Compatible with mineral and synthetic oils. Features: low carbon footprint, low weight and easy installation, wear-resistant multiple inlet ports, particle-blocking filter system, user-friendly maintenance. ISO 9001:2015 certified.
Why KELTEC here KELTEC's KOWS separators bring oil-laden compressor condensate into ISO 14000 compliance, cutting oil concentration from the typical 500-3,000 ppm down to below the 10-ppm legally dischargeable level. The KOWS-250 and KOWS-400 work the condensate through successive stages — a depressurization chamber, a Mikro-Sep separator element, Mikro-X-Tex media, and Mikro-Carb activated-carbon granules — and the line is compatible with both mineral and synthetic compressor oils. A 7-model range from 60 to 2,000 CFM, low installed weight, and wear-resistant multiple inlet ports give SPC a straightforward, easy-to-install separator option across the common small-to-mid compressor range.
KELTEC Panel Filter Elements (KA-series)
Coverage Wide range of box-shaped intake panel filters with multiple media and face-screen options. Datasheet models: KA 093 (24x24x1.5", polyester felt, washable, 2500 SCFM, 10 micron / 98%), KA 005 (24x24x2", polyester felt, washable, 2500 SCFM, 10 micron / 98%), KA 099 (24x24x2", polyester felt, washable, 1250 SCFM, 4 micron / 98%), KA 176 (24x24x6", microglass, 1250 SCFM, 5 micron / 98%), KA 164 (24x24x12", microglass, 2500 SCFM, 2 micron / 99.7%), KA 166 (24x24x12", microglass, 1250 SCFM, 0.3 micron / 99.97%), KA 771 (18x18x12", microglass, 1250 SCFM, 2 micron / 99.97%), KA 770 (18x18x2", polyester felt, washable, 1250 SCFM, 10 micron / 99%).
Industrial panel filters regulate airflow and protect equipment from particulate and corrosion. A high-quality alternative to OEM replacements, built to original equipment manufacturer specifications and designed for structural integrity through handling, installation, and operation. Interchanges for all manufacturers. Rugged industrial construction: galvanized steel frames, metal straps for easy removal, metal support screens on both sides. Polyester felt media options are washable; microglass media options reach 99.97% efficiency. Huge inventory with competitive pricing; same-day shipping available on in-stock parts ordered before 3pm. ISO 9001:2015 certified.
KELTEC air-filter elements — KA / KC / KS model-number series (1,123 distinct part numbers; panel-filter variants on KA)
Coverage Coverage is by cross-reference breadth rather than a fixed specialty-variant ladder. KELTEC's March 2025 Domestic Pricebook crosses 5,222 air-filter line items — 1,123 distinct KELTEC element part numbers spanning 248 distinct OEM compressor/filter brands (Atlas Copco, Ingersoll Rand, Sullair, Gardner Denver, Quincy, Kaeser, FS-Curtis, ABAC, ELGi and others). Air-filter elements run on the KA, KC and KS model-number series, with dimensional coverage of roughly 1.2-30 in outside diameter, 0.4-23.9 in inside diameter, and 1-39 in overall height (molded and metal end caps; panel-filter variants additionally on the KA series). High-flow or higher-pressure needs are met by matching the corresponding OEM element by cross-reference and dimensions rather than by an independent KELTEC spec. As an aftermarket OEM-replacement brand, KELTEC does not publish an independent particulate-housing micron/pressure datasheet — the OEM cross-reference plus the element dimensional table is the published specification, and the element is matched to the OEM part by cross-reference and physical dimensions. No hazardous-location (Class 1 Div 1) variant.
KELTEC supplies dry-particulate filter elements and housings, with a cross-reference catalog spanning 50,000+ OEM part numbers — a DC rep can read the nameplate on an existing particulate housing (Parker, Finite, Great Lakes Air, Beko, Arrow, and others) and quote a fitting KELTEC replacement element on the spot. KELTEC also offers its own complete particulate housings. Particulate elements have the longest service life in a filter train, so the recurring replacement cadence is steady and predictable.
Why KELTEC here KELTEC's strength is aftermarket reach — its 50,000+ part cross-reference lets SPC win the recurring particulate-element replacement business on any filter or compressor brand a customer already owns. Particulate elements run on a long service interval, so a single KELTEC cross-reference opens a steady, low-friction MRO relationship in plants where the original housing came from someone else.
KRAD Series non-cycling refrigerated compressed air dryers with integrated filters
Coverage 27 models from KRAD-10 (10 acfm, 1/2" NPT) to KRAD-5500 (5500 acfm, 8" NPT). Voltage scales from 115/1/60 on small units to 230/1/60 and 460/3/60 on larger units. All use R134a refrigerant, <3 psi pressure drop, 230 psi max working pressure, 122F max ambient, 140F max inlet temp. Piston compressors on models up to 250 cfm; energy-efficient scroll compressors on 600 cfm and up. Integrated dual filter system on models up to KRAD-2600. Replacement filter kits ADFK1-ADFK7 by model.
Non-cycling refrigerated dryer with integrated compressed air filters (filters to 0.01 micron). Designed for tropical conditions — operates with 140F inlet temperatures via R134a refrigerant and an oversized condenser; achieves a 38F real pressure dew point. Aluminum plate heat exchanger gives very low pressure drop (2 psi). Multi-functional digital controller with dew point display and coded alarm monitoring. Service-friendly: electrical box separated from refrigerant side with external access; wires in plastic cable holders/conduits; extra ball valves brazed into the refrigerant circuit for parts replacement without releasing gas; pressure switches in the electrical box; cooling components accessible via removable panels; top-mounted condensers for easy ducting. CFM ratings assume 100 psi, 100F ambient, 100F inlet; pressure/ambient/inlet correction factors provided for sizing. KELTEC Technolab, founded 1982, is the largest air-oil separator manufacturer in North America.
Why KELTEC here KELTEC's KRAD series pairs a refrigerated dryer with integrated 0.01-micron coalescing filters, so a single unit delivers both the drying and the oil-and-water-mist filtration a quality air train needs — and it is engineered for tropical duty, holding a real +38°F pressure dew point on inlet air up to 140°F. An aluminum plate heat exchanger keeps pressure drop under 3 PSI, and the unit is built to be serviced: the electrical box is isolated from the refrigerant side, extra ball valves are brazed into the circuit so parts can be swapped without releasing gas, and cooling components come out through removable panels. The 27-model range runs from 10 to 5,500 ACFM, letting SPC cover a small shop or a large header from one well-supported series.
KELTEC compressor lubricants — KOA PAO-synthetic series, KOPS / KOSGLX synthetics, KOPGI / KOPGRS polyglycol; KOFLUSHFG / changeover-flush fluids
Coverage KELTEC's March 2025 Domestic Pricebook confirms a KELTEC-branded compressor lubricant line under the KO* part-number prefix — 1,203 lubricant line items cross-referenced against 83 distinct OEM compressor brands (Quincy, Ingersoll Rand, Gardner Denver, Atlas Copco, Kaeser, CompAir, Sullair, FS-Curtis, Champion and others). Synthetic base-stock families in the pricebook: KOA (PAO-synthetic, the general rotary-screw fill — ISO grades confirmed at 32 and 46 via KOA32S/KOA46S, plus a wide range of OEM-match codes such as KOA467C/KOA468C/KOA680C); KOPS (synthetic, ISO 10/20/30/200); KOSGLX (ISO 220); KOPGI/KOPGRS (polyglycol, high-temperature / high-oxidation duty); KOSUPREME and KOSIL among the specialty fills. Each fill is cataloged in 5-gal pail (-05) and 55-gal drum (-55) packs against the OEM factory-fill it replaces. Food-grade fills are a separate KOSFG line (see Food-Grade Compressor Oil). As an aftermarket OEM-replacement brand, KELTEC matches the fill to the OEM-specified lubricant by cross-reference; published per-grade drain-interval ratings are not part of the cross-reference pricebook and are not asserted here as an independent KELTEC spec.
KELTEC Technolab makes a full range of compressor lubricants on PAO, diester, and polyglycol base stocks, formulated to suppress foaming, oxidation, and deposit formation. The KOA PAO-synthetic line is the general rotary-screw fill and is rated to roughly an 8,000-hour service life; the KOPG polyglycol line addresses the high-temperature and high-oxidation duty where a glycol fluid is specified. KOCLEAN is a synthetic varnish-dissolving fluid that solubilizes sludge while the compressor runs and doubles as a system flush when converting a unit from mineral to synthetic oil. Each fluid is cataloged against the OEM factory-fill it replaces, so a DC rep can read a compressor nameplate and quote the KELTEC equivalent.
Why KELTEC here KELTEC's strength is aftermarket cross-reference reach: its catalog crosses 50,000+ OEM part numbers, and the lubricant line is built the same way — a fill cataloged against the compressor brand a customer already owns. That lets SPC quote a direct OEM-equivalent synthetic fill on the spot for any compressor in the field, capturing the recurring oil-change business even where the original equipment came from someone else. KELTEC also supplies the coalescing and particulate elements SPC crosses elsewhere, so the oil comes from a brand the DC channel already stocks.
KELTEC aftermarket thermostatic (oil-temperature) valves and elements
Coverage Covers the thermostatic valve set-point variants taught on the Product Type page — matched by the regulating temperature of the OEM valve being replaced — cross-referenced to OEM compressor part numbers.
KELTEC supplies aftermarket thermostatic valve assemblies and thermal elements for rotary screw compressors, cross-referenced to the OEM part number. The valve regulates how much oil routes through the cooler versus bypassing it, holding the air-end in its design temperature band. \[VERIFY\] the specific temperature set point / regulating range of each cross-referenced valve against a KELTEC datasheet — the replacement must match the original valve's set point. The KELTEC March 2025 Domestic Pricebook (31,725 cross-reference rows) was searched and contains no thermostatic-valve product Type: the only valve entries are relief-valve mufflers (Type MUFF, a different product) and two dryer-internal TXV/bypass valves under the DRYERS line. No standalone thermostatic-valve cross-reference exists in the on-disk material; this record needs the thermostatic-valve cross-reference and set-point data direct from KELTEC.
Why KELTEC here KELTEC extends its cross-reference catalog beyond filtration to the thermostatic valve, so the DC channel can keep oil-temperature control parts on the same OEM-cross workflow as the separator, intake, and oil filter — a single source and a single nameplate lookup for the consumable and the temperature-control wear part alike.
SDV-ZEROLOSS Electronic Zero Loss Drains
Coverage 4 models sized by air compressor performance: SDV-ZEROLOSS-175 (175 scfm compressor / 350 scfm dryer / 1750 scfm filter), SDV-ZEROLOSS-250 (250 / 500 / 2500 scfm), SDV-ZEROLOSS-530 (530 / 1060 / 5300 scfm), SDV-ZEROLOSS-1750 (1750 / 3500 / 17,500 scfm). Operating pressure 11.6-232 psi; operating temp +34F to +176F; condensate inlet 1/2" x 2 on all models; outlet 1/2" x 1 (3/8" x 1 on the -250). Weights 2.9-4.9 lb.
Electronic zero-loss condensate drain removes harmful condensate from receiver tanks, aftercoolers, dryers, filters, and drip legs without wasting compressed air. 100% continuous duty; fully automatic with manual override switches; LED power and valve-open indicators; status display. NEMA 4 (IP65) hardcoated aluminum housing; CE & TUV approved; long-lasting VITON seals (NBR O-ring, FKM diaphragm, ABS casing); 6 ft heavy-duty power cord with AC plug. Standard power 90-260 V AC / 50-60 Hz; custom 24V/48V AC or DC available. Suitable for oil-free and oil-injected compressors. Benefits: improves air system performance, eliminates downtime maintenance, prevents corrosion/scaling, increases pipeline air-carrying capacity, prevents winter freezing/bursting, extends equipment life. ISO 9001:2015 certified.
Why KELTEC here KELTEC's SDV-ZEROLOSS drains discharge condensate from receivers, aftercoolers, dryers, filters, and drip legs without venting any compressed air — the zero-air-loss behavior this page is built around — on 100% continuous duty with fully automatic operation and manual override. A NEMA 4 (IP65) hardcoated-aluminum housing, CE and TÜV approval, and long-life VITON seals suit it to wet, harsh drain locations, and a wide 90-260 V AC supply (with 24V/48V options) covers most sites without a special order. Four models sized by compressor, dryer, and filter flow let SPC match the drain to each cool point, and the line gives the DC channel a value-tier zero-loss drain to set against premium European brands.
