Atlas Copco 2WIN twin G-series oil-injected screw compressor (G7 Full Feature, tank-mounted)
Coverage Single SKU in the Aii pricelist — 2WIN-G7FF TM 145 Tri-V — combining two G7 Full Feature pumps (each with integrated refrigerant dryer) on a tank-mounted (TM) frame, 145 PSI, Tri-V power. Belt drive, Elektronikon Nano controller, 1/2" air outlet. The Atlas Copco 2WIN is currently published only at the G7 frame size (~7.5 kW / 10 hp per pump, ~15 kW / 20 hp combined). For larger duplex / triplex needs the customer specifies multiple standalone Atlas Copco G or GA compressors and adds an Equalizer 4.0 or EQi central controller separately (the Equalizer / EQi sequencer is sold as a separate item in the Aii pricelist's Central Controllers & Connectivity section).
Atlas Copco's 2WIN is a factory-built twin G7 oil-injected rotary screw on a single tank-mounted package — 2WIN-G7FF TM 145 Tri-V in the Aii pricelist — pairing two complete G7 full-feature compressors (7.5 kW / 10 hp each, 145 PSI, with integrated refrigerant dryer on each pump) on one 80-gallon receiver. The two pumps share a single Elektronikon Nano controller running lead-lag staging with automatic lead alternation so run-hours and wear spread evenly across the two pumps. The result is a factory-engineered, single-SKU duplex screw system at the workshop / small-industrial size — installed footprint and electrical connection are simpler than building a duplex from two standalone units and a custom staging panel, and it shares Atlas Copco's G-series service interval (4,000 hours) and SMARTLINK remote-monitoring connectivity.
Why Atlas Copco here Atlas Copco's 2WIN is the factory-engineered duplex answer for the workshop / small-industrial flow band — quieter and more compact than a custom duplex built from two standalone units, with the lead-lag staging integrated into a single controller and the integrated refrigerant dryers in the air path. When the customer wants Atlas Copco's brand promise plus single-vendor support on a true duplex system, 2WIN is the pre-packaged answer; for larger or mixed-size duplex/triplex needs SPC quotes standalone G/GA units plus an Atlas Copco Equalizer/EQi central controller as a follow-on.
Atlas Copco AQ-series oil-free rotary VSD; SF / SF+ / SFD oil-free scroll (mono, multi, duplex)
Coverage Two technologies on one brand: rotary (AQ) and scroll (SF). AQ — VSD-only, 15-55 kW: AQ15-18 VSD, AQ22-30 VSD, AQ37-55 VSD; water- and air-cooled; factory options include water shut-off, RO booster pump, anchor pads, flanged inlet, thermistors + heaters, performance test certificate, IT ancillaries, EQ2i/EQ4i/EQ6i sequencer. SF — Mono (SF1-6, single scroll: 1, 2, 4, 6 kW) available Pack or Full Feature with an optional CD5+ refrigerated dryer; 30L / 270L / 500L tank-mount options. SF Multi (SF8+ / SF11+ / SF15+ / SF17+ / SF22+) and SF Duplex (SFD11+ / SFD15+ / SFD22+) combine multiple scroll heads on one frame for 8-22 kW flow with the ES4i / ES6i sequencer integrated on multi-pump builds. All SF are oil-free scroll, all AQ are oil-free rotary; both lines target the Class 0 clean-air applications above.
Atlas Copco's industrial-tier oil-free offering in the Aii pricelist spans two technologies. The AQ series is a Variable Speed Drive oil-free rotary compressor, datasheet-confirmed across the AQ15-30 VSD and AQ37-55 VSD frames (15-55 kW / 20-75 HP), water- and air-cooled with factory options for water shut-off, RO booster pump, and a performance test certificate. The SF / SF+ series is an oil-free scroll compressor — SF Mono (SF1-6, 1-6 kW / 1.5-7.5 HP) in single-pump packs and full-feature builds with an optional integrated CD5+ refrigerated dryer, and SF Multi / SF Duplex (SF8+ through SF22+, 8-22 kW / 11-30 HP) which combine multiple scroll heads on one frame for higher flow without changing technology. Both lines deliver ISO 8573-1 Class 0 air. Multi-pump SF builds include the ES4i / ES6i sequencer for integrated lead-lag staging across the scroll heads. [VERIFY] exact ISO 8573-1 Class 0 certification scope per series — confirm against Atlas Copco AQ / SF engineering datasheets before publish.
Why Atlas Copco here Atlas Copco's oil-free line gives SPC a single-brand answer across the full oil-free range. The AQ rotary VSD covers mid-size industrial clean-air loads (electronics, packaging, general manufacturing); the SF scroll covers small clean-air applications where footprint and noise matter (dental, lab, medical-device, electronics assembly). When a customer is already running Atlas Copco oil-injected screws on the rest of the plant, the AQ or SF oil-free unit slots in with one technical-support path and one distributor relationship — keeping the brand consistent across both wet-and-clean-air sides of the facility.
Atlas Copco G-series & GA-series fixed-speed oil-injected rotary screw
Coverage Fixed-speed oil-injected rotary screw. G series — G 2-7, G 7L-15, G 15L-22 (workshop and light-industrial, 3-30 hp), plus the larger G 37-45 and G 55-75. GA series — GA 5-11, GA 11-30 FLX, GA 15-30, GA 30+, GA 37-45, GA 55-90 (mid-size to roughly 125 hp). Every model ships Pack (base-mounted) or tank-mounted, and as a Full Feature build with an integrated refrigerant dryer; pressure options run 8-13 bar(e). The variable-speed AC line (G VSD / GA VSDS / GA VSD+) is covered by the separate VFD product type.
Atlas Copco's fixed-speed oil-injected rotary screw line runs from the workshop-class G series — G 2-7 (2.2-7.5 kW / 3-10 hp), G 7L-15 and G 15L-22, datasheet-verified at 8-13 bar(e) (116-189 psig), roughly 9-131 cfm FAD, IE3 premium-efficiency motors, a belt-driven screw element, 100% continuous duty to 46°C / 115°F, 61-71 dB(A), and oil carry-over under 3 ppm — up through the larger G 37-75 frames and the GA series (GA 5-11, GA 11-30 FLX, GA 15-30, GA 30+, GA 37-45, GA 55-90) to roughly 90 kW / 125 hp. Performance is rated to ISO 1217; the Elektronikon Nano/Touch controller and a 4,000-hour service interval are standard, and units ship Pack (base-mounted) or tank-mounted, with a Full Feature build adding an integrated refrigerant dryer. SPC carries Atlas Copco compressor equipment, with the small- and mid-size fixed-speed units the most relevant launch range; the brand page leads on equipment and does not over-promise parts/aftermarket turnaround, as the AC parts channel has friction.
Why Atlas Copco here Atlas Copco is the global rotary screw benchmark, and SPC carries the AC compressor line — so when a customer wants the industry-standard brand on a fixed-speed screw, the DC channel can quote it directly. The brand page leads on equipment and is honest about parts-channel turnaround rather than over-promising it.
Atlas Copco G VSD / GA VSDS / GA VSD+ variable-speed oil-injected rotary screw
Coverage Variable-speed oil-injected rotary screw, with three drive generations live across the range. G 2-7 VSD covers the 3-10 hp workshop frames. GA VSDS is the third-generation line — GA 5-18 and GA 22-37 VSDS — with the FASR/IE5 motor and up to 60% energy savings. GA VSD covers the GA 22-45 frames, and GA VSD+ the largest frames (GA 37L-75 and GA 75L-110, to roughly 150 hp). Full Feature builds add an integrated refrigerant dryer; with the UD+ filter the GA VSDS Full Feature meets ISO 8573-1 Class 1.4.2. Fixed-speed AC units are covered by the separate fixed-speed product type.
Atlas Copco's variable-speed oil-injected rotary screw line spans three drive generations across the frame range. At the workshop end, G 2-7 VSD (2.2-7.5 kW / 3-10 hp, belt-driven, Elektronikon Nano, as quiet as 57 dB(A)) brings variable speed to the smallest G frames. The mid-range is the third-generation GA VSDS (GA 5-37 VSDS, 5-37 kW / 7-50 hp): its Ferrite-Assisted Synchronous Reluctance (FASR) motor reaches IE5 efficiency without rare-earth materials, the Neos Next inverter delivers up to 60% energy savings versus an equivalent GA fixed-speed unit, and up to 80% of compression heat is recoverable; noise runs 62-71 dB(A) and pressure options reach 10 or 13 bar(e). The largest frames (GA 37L-110) carry the prior-generation VSD+ designation. All are oil-injected and ISO 1217-rated, with the Elektronikon Touch controller and SMARTLINK connectivity standard. SPC carries Atlas Copco compressor equipment; the small and mid-size VSD units are the most relevant launch range, and the brand page leads on equipment without over-promising parts turnaround.
Why Atlas Copco here Atlas Copco's variable-speed rotary screw line is the industry benchmark for the VSD energy story, and SPC carries the AC compressor line — so when a customer wants the industry-standard brand specifically for its variable-speed energy savings, the DC channel can quote it directly.
