HFMP series High Flow Plastic Muffler
Coverage HFMP covers 1/8" to 1/2" NPTM in four models, single element style (50-mesh stainless screen). The HFMP perforated-shell body also provides the high-flow, wide-area diffuser-style discharge within the plastic line. No finer/coarser element grades and no female-thread or certified variant in the plastic line — for those, the sintered bronze line is used.
Adsens' plastic-muffler offering is the HFMP High Flow Plastic Muffler — a nylon body with a 50-mesh stainless steel screen element, four models, 1/8"-1/2" NPTM. Rated to 150 PSI and 35-120°F — the nylon body sets the lower pressure and temperature ceiling versus bronze. It is the light-duty, low-cost, corrosion-resistant option in the Adsens line, and its perforated-shell HFMP body also delivers the high-flow, wide-area diffuser-style discharge within the plastic line.
Why Adsens here Adsens covers the plastic muffler at the same economy price point as its bronze line, giving SPC a light-duty, corrosion-resistant, low-weight option for panel builds and test benches without leaving the brand. It keeps the full muffler choice — bronze and plastic — on one economy line card.
Adsens pressure instrument line [VERIFY]
Coverage Covers basic pressure indication: system-pressure readout and filter differential-pressure checking (differential needs two tap points). Output options — visual gauge readout vs. electrical signal to a controller — and the pressure-range / port-thread span are to be confirmed against an Adsens datasheet. [VERIFY] Product depth at the required range and port must be verified before quoting.
Adsens is the economy / price-floor pressure-instrument brand in the SPC portfolio, for straightforward system-pressure indication and filter differential-pressure checks where a precision transmitter is more instrument than the job needs. The specific Adsens model line, pressure ranges, port/thread options, and output types (visual gauge vs. electrical signal) should be confirmed against an Adsens engineering datasheet before this brand is led on a quote — current SPC material describes the tier but does not name a verified model series. [VERIFY]
Why Adsens here Adsens is SPC's price-floor option for simple pressure monitoring — the entry-tier choice when a customer just needs to see whether system pressure is up or down, or whether a filter element is loading, and a precision transmitter would be over-spec for the task. It keeps a basic pressure-indication line on the shelf at a competitive cost so SPC can answer a budget-driven request without reaching for a higher-tier instrument.
BM / BMS / FBMS series sintered bronze mufflers
Coverage Thread coverage from 10-32UNF through 1" NPT across BM/BMS, and 1/8"-1/2" female NPTF on FBMS. Element grades 10 / 40 / 90 micron trade filtration against flow. Adsens also offers a flow-adjustment bronze muffler (SPBMS) that adds an exhaust-throttling collar for cylinder speed control. No certified / NSF / ATEX variant — economy tier.
Adsens is the economy / price-floor muffler brand in the SPC portfolio — the consumable that ships as a line item with every valve and cylinder order. The sintered bronze line spans three bodies: BM (brass body, compact, eight models, smallest ports), BMS (zinc-plated iron body, nine models, larger bores and higher flow), and FBMS (nickel-plated steel body, female NPTF thread, four models). All use a sintered bronze element — 40 micron standard, with 10 and 90 micron grades available. Rated to roughly 300 PSI and 35-300°F.
Why Adsens here Adsens keeps the muffler line-item competitive on every valve and cylinder package, so an SPC quote goes out complete without reaching for a premium accessory. Mufflers are a brand-agnostic, price-driven consumable — a working sintered bronze muffler is a working sintered bronze muffler — and Adsens delivers that function at the price floor with full standard-thread coverage.
