ASME Horizontal Air Receivers (VES-series)
Coverage Horizontal saddle-mounted configuration (Morganton verticals are covered under the Vertical Receiver Tank type). Standard pressure tier 200 PSI, with 300 PSI on selected sizes. Wet or dry service with service-appropriate coating. Project-order lead time.
Morganton builds US-made, ASME-coded horizontal air receivers — published horizontal models include 15, 30, 60, 80 and 120 gal, with 200 PSI standard and 300 PSI offered on selected sizes (60 and 80 gal top-plate models). Carbon-steel, ASME Section VIII Div 1, U-stamped and National Board registered. Saddle-mounted with standard NPT port schedule. Project-order build basis. C&C catalog listing (VES series) spans a 10–120+ gallon range at 200 and 300 PSI, with base ring, feet, and top-plate support styles, all ASME certified, hydrostatically tested, and made in USA (select imported models); custom stainless and large-capacity tanks available on request.
Why Morganton here Morganton offers a lower-cost, US-made, fully ASME-coded horizontal receiver for headroom-limited or skid layouts where the account is price-sensitive and can accept a project-order lead time — identical code compliance to the catalog leader at a better price.
Custom & Made-to-Order ASME Pressure Vessels
Coverage Engineered / build-to-spec tier within Morganton's small-to-mid capacity range: custom dimensions and port locations, stainless-steel construction, vacuum and oxygen service, and high-pressure ratings above the standard 300 PSI tier (to 1,000 PSI on special products). Vertical and horizontal orientations both available. Standard catalog-size air receivers are covered by Morganton's Vertical and Horizontal Receiver Tank types; very large volumes (well beyond ~400–1,000 gal) and the largest high-pressure Division 2 work fall outside Morganton's range. Project-order lead time; nothing on this line is deep-stocked.
Morganton runs a dedicated made-to-order line alongside its standard VES-series receivers, building custom and small-series pressure vessels in both carbon and stainless steel. Beyond plain air receivers it fabricates vacuum vessels, oxygen vessels, separator/filter/dryer vessels, and other special pressure equipment, with custom port schedules and non-standard geometry built to the application. Capacity on this custom line runs through roughly 400 gallons (with select distributor listings to about 1,060 gallons), and a high-pressure tier covers special products rated to 1,000 PSI versus the standard −15 to 300 PSI range. Construction is ASME-coded [VERIFY: Div 2], U-stamped and National Board registered, with additional code experience across CRN, PED, CE, and AS1210 for export and specialty work. Like all Morganton product, these are project-order builds rather than stocked items.
Why Morganton here Morganton gives SPC a US-made, ASME-coded custom-vessel option at the economy tier — the right answer when an account needs a non-standard or stainless small-to-mid pressure vessel and is price-sensitive on a project-order basis. It pairs naturally with Morganton's standard VES-series receivers: an account already specifying Morganton tanks can stay with one familiar, code-compliant manufacturer when a job needs a one-off custom vessel. For the largest engineered vessels and the highest-pressure Division 2 work, Samuel PVG remains the dedicated engineered-tier specialist; Morganton's role on this type is the accessible, cost-conscious custom builder for smaller-scale specialty work.
ASME Vertical Air Receivers (VES-series)
Coverage Vertical leg-mounted configuration (Morganton also builds horizontal — see the Horizontal Receiver Tank type). Standard pressure tiers 200 PSI, with 300 PSI available on some sizes. Wet or dry service covered by the same tank with service-appropriate coating. Project-order lead time; no large deep-stock inventory.
Morganton builds US-made, ASME-coded vertical air receivers in the standard industrial size range — published vertical models include 60, 120, 200 and 240 gal at 200 PSI, with 300 PSI variants offered on selected sizes. Carbon-steel construction, ASME Section VIII Div 1, U-stamped and National Board registered. Leg-mounted with standard NPT port schedule. Built on a project-order basis rather than carried in deep stock. C&C catalog listing (VES series) spans a 10–120+ gallon range at 200 and 300 PSI, with base ring, feet, and top-plate support styles, all ASME certified, hydrostatically tested, and made in USA (select imported models); custom stainless and large-capacity tanks available on request.
Why Morganton here Morganton delivers the same ASME Section VIII compliance and US manufacture as the catalog leader at a lower price point, which makes it the clean answer when an account is price-sensitive and can accept a project-order lead time. Code compliance is identical — the trade is delivery speed, not legitimacy.
