AMSOIL synthetic food-grade compressor oil (NSF H1)
Coverage Single-purpose food-grade line: NSF H1-registered synthetic compressor oil offered across the standard ISO 32 / 46 / 68 viscosity grades, matched to the OEM-specified grade. Service interval roughly 6,000 hours in rotary-screw service. No reciprocating-specific or hazardous-location sub-variant. [VERIFY] full per-grade ISO ladder and the H1 registration number against the current AMSOIL Industrial food-grade compressor-oil data sheet.
AMSOIL Industrial offers an NSF H1-registered, non-detergent synthetic compressor oil for food-grade service — engineered to protect rotary-screw compressors against wear and carbon/varnish buildup while carrying the H1 registration required where the lubricant or compressed air can have incidental product contact. It is supplied in standard ISO viscosity grades and is rated for roughly a 6,000-hour service life in rotary-screw duty, somewhat shorter than the standard synthetic line because the H1 additive chemistry is constrained by food-contact rules. [VERIFY] the exact AMSOIL food-grade compressor-oil product name and product code — distributor listings reference 'PRISTINE-S-AIR' and 'AMSAIR-FG' for the AMSOIL Industrial H1 compressor oil, but the canonical name on the current AMSOIL Industrial datasheet was not directly confirmable; do not publish a product code until checked.
Why AMSOIL Industrial here AMSOIL Industrial is SPC's dedicated lubricant brand, so its food-grade compressor oil keeps the NSF H1 conversation in the same place as the standard synthetic line — one brand, one cross-reference, whether or not the plant carries a food-contact audit requirement. For a food, beverage, or pharmaceutical customer that already runs AMSOIL elsewhere, the H1 fill is a same-brand swap that satisfies the audit without changing supplier.
AMSOIL SIROCCO; AMSOIL PC Series synthetic compressor oil
Coverage Base-stock variants: synthetic ester (SIROCCO, rotary-screw and vacuum-pump service) and PAO (PC Series, rotary-screw / rotary-vane / reciprocating). ISO viscosity grades: SIROCCO covers ISO 32/46 as a multigrade; PC Series covers ISO 32 / 46 / 68 / 100 / 150 (PCH/PCI/PCJ/PCK and a 150 grade). Service interval: roughly 8,000-hour extended drain. Compatible with PAO-, ester-, and petroleum-based oils; not compatible with glycol- or silicone-based fluids. Food-grade NSF H1 fills are a separate AMSOIL line (see Food-Grade Compressor Oil). No hazardous-location product variant — area classification is not a lubricant attribute.
AMSOIL Industrial fills the synthetic compressor-oil slot with two non-detergent lines. SIROCCO is a synthetic-ester fluid for rotary-screw compressors and vacuum pumps, supplied as a multigrade fluid covering ISO 32/46 service. The PC Series is a PAO-based line spanning ISO 32, 46, 68, 100, and 150 — product codes PCH (ISO 32), PCI (ISO 46), PCJ (ISO 68), and PCK (ISO 100) — rated for rotary-screw, rotary-vane, and reciprocating compressors. Both lines carry an extended drain interval (roughly 8,000 hours under normal service, against 2,000–4,000 for conventional oil) and a published cross-reference to OEM factory fills, which is the basis of the total-cost-of-ownership pitch.
Why AMSOIL Industrial here AMSOIL Industrial is SPC's dedicated synthetic-lubricant brand, so the compressor-oil conversation has a single, focused home. Its value is the TCO case: the extended 8,000-hour drain interval cuts both oil spend and the labor of every oil change, and the published OEM cross-reference lets a DC rep replace the factory fill on the major compressor brands a customer already runs — turning every installed compressor in the territory into a recurring fill account.
